← 5541 S Peoria St, Chicago, IL 60621 · All properties

Repair Estimate - 2024-10-10 - 5541 S Peoria St, Chicago, IL 60621.pdf

This page is a searchable text preview. Use the Dropbox link for the full original file.

Open full file in Dropbox

What This File Appears To Be

Crawford Construction Corp. Estimate 5113 S Harper Ave Estimate No: 3533 Date: 10/08/2024 Chicago, IL, 60615-4119 info@crawfordconstructioncorp.net www.crawfordconstructioncorp.net 312.229.0134 For: Home River Group LLC 9100 Keystone Crossing STE 610 Indianapolis, IN 4624 1 Meld Number TKILHQDB - Address: 5541 S Peoria St #2, Chicago, IL 60621 Code Description Ventilation: Chimney Cleaning and Debris Removal - 1.00 EA (Mandatoy) • Description: Clean and remove debris, including concrete, from th

Text Preview

Crawford Construction Corp.

Estimate

5113 S Harper Ave

Estimate No:

3533

Date:

10/08/2024

Chicago, IL, 60615-4119
info@crawfordconstructioncorp.net
www.crawfordconstructioncorp.net
312.229.0134

For:

Home River Group LLC
9100 Keystone Crossing STE 610
Indianapolis, IN 4624

1

Meld Number TKILHQDB - Address: 5541 S Peoria St #2, Chicago, IL 60621

Code

Description

Ventilation:

Chimney Cleaning and Debris Removal - 1.00 EA

(Mandatoy)

• Description: Clean and remove debris, including concrete, from the chimney to ensure

Quantity

Rate

Amount

30

$32.15

$964.50

28

$89.50

$2,506.00

proper ventilation for the water heater. The chimney is approximately 30 linear feet.
• Scope of Work:
o Thoroughly clean the interior of the chimney.
o Remove all debris and concrete obstructing proper ventilation.
o Inspect to ensure proper water heater ventilation post-cleaning.
• Approximate Length: 28 LF
• Additional Notes: Proper ventilation is essential for the water heater’s functionality and
safety.

Ventilation: (If

Stainless steel flue liner - 28.00 LF

Needed)

Includes: Stainless steel flue liner and installation labor. Labor cost to remove a stainless steel
flue liner
Parts Subtotal

1/2

$3,470.50

Crawford Construction Corp. - Estimate 3533 - 10/08/2024
Subtotal

$3,470.50

Includes TAX 0%

$0.00

Total

$3,470.50

Total

$3,470.50

Notes
Vent a Water Heater Flue Through a Chimney:
1. Inspect the Chimney:
o Ensure the chimney is in good condition and free of blockages (e.g., debris, bird nests).
o Verify that the chimney is appropriate for venting a gas appliance, as some may need to be relined.
2. Install a Chimney Liner (if needed):
o Why: Most chimneys are too large for a single water heater flue, which can lead to poor draft and condensation buildup.
o Material: Use an approved chimney liner, typically made of stainless steel or aluminum, depending on the type of gas water heater.
o Installation: Feed the chimney liner from the top of the chimney to the area where the water heater flue will connect. Secure it at the chimney top with
a proper cap and flashing.
3. Connect the Flue Pipe to the Liner:
o Use a B-vent or double-wall vent pipe from the water heater to the chimney. This type of pipe ensures proper insulation and heat resistance.
o Connect the flue pipe to the chimney liner using a secure fitting or adapter at the chimney’s base.
4. Ensure Proper Slope of the Vent Pipe:
o The vent pipe should slope upwards at least 1/4 inch per foot toward the chimney to ensure proper draft.
5. Seal the Connections:
o Use high-temperature sealant or sheet metal screws to securely connect the flue pipe to the chimney liner. Check for any gaps or leaks.
6. Install a Chimney Cap:
o At the top of the chimney, install a vent cap to prevent debris, rain, or animals from entering the chimney while allowing exhaust gases to escape.
7. Test the Draft:
o Once installed, check the water heater’s venting system for proper draft using a smoke pencil or similar device. The smoke should be drawn into the
flue, indicating a proper draft.
Important Considerations:
• Code Compliance: Ensure all venting complies with local building codes and manufacturer recommendations for your water heater.
• Safety: Make sure the chimney is not shared with other appliances unless specifically designed to do so.

2/2